3U VPX Rear Transition Module
For VPX3-ZU1B VPX3-ZU2
Dual Ethernet 1000BaseT RJ45
Quad USB 2.0 Type A
miniDispaly Port
AMD-Xilinx JTAG
GPIOs
RS-232/422
VPX Battery
USB UART
SATA
specifications
- 3U VPX RTM (100 x 81.5 mm)
- VITA 46.0, 46.10, 65.0 specifications compliant
- 0.8 or 1 Inch Rear Panel Width
- Dual 100/1000 Base-T RJ-45 with status Leds connectors
- Dual USB 3.0/2.0 Type-A stacked connectors
- Dual USB 2.0 Type-A stacked connectors
- Mini DisplayPort 1.2 Video Output connector
- SATA 3.1 on-board vertical connector
- Micro USB on-board vertical UART for VPX3-ZU1 Zynq
- Micro USB on-board vertical UART for VPX3-ZU1 BMC
- 10x LVDS / 20x GPIOs on-board 20-pin vertical connector
- 2x RS-232/422/CAN on-board 10-pin vertical connector
- Power Monitor (VS1, VS2, VS3) with status LEDs
- On-board Xilinx JTAG Programming/Debuging connector
- On-board Push-Button VPX SysReset
- On-board Socket for Battery sourcing VPX VBAT
Ordering Information
- RTM-ZU1-A : RTM for VPX3-ZU1 with 0.8 inch Front-Panel
- RTM-ZU1-B : RTM for VPX3-ZU1 with 1.0 inch Front-Panel
Description
The RTM-ZU1-A is an 3U VPX Rear IO Transition Module for the VPX3-ZU1B 3U VPX AMD Zynq Ultrascale+ MPSoC module from PanaTeQ.
The following interfaces are available through the Rear Panel connectors:
- 2x Ethernet 100/1000BaseT RJ-45 connectors
- 2x USB 3.0 Type-A stacked connectors
- 2x USB 2.0 Type-A stacked connectors
- 1x mini Display Port 1.2 video output connector
Also these interfaces are available using the on-board vertical connectors.
- 1x SATA 3.1
- 1x micro USB UART Zynq
- 1x micro USB UART BMC
- 20-pin for 20x GPIOs
- 10-pin 2x RS-232/422/485 + 2x CAN-bus
- 14-pin standard Xilinx JTAG Prog/Debug
- Battery Socket VPX VBAT
- Push-Button VPX SysReset
- Main VPX Power Monitoring (VS1, VS2, VS3)
The air cooled PanaTeQ System Development Kit VPX3-ZU1B-PSDK-A is available for the developers and includes a 4U lab chassis with 3/5 slots, the VPX3 -ZU1B-B1M-AS and RTM-ZU1-A boards, a Linux BSP, the PanaTeQ reference designs.
