• 3U VITA 46.0, 46.4, 46.6, 65.0 Compliant
• Optional SOSA Aligned version VPX3-VERSA2S-MxFE4
• 4T4R AD9084 Apollo MxFE Quad, 16-Bit, 28 GSPS RF DAC and Quad, 12-Bit, 20 GSPS RF ADC
• AMD VERSAL Prime Series based
• VM1502/1802 VSVC1760 Package
• Dual Core Arm A72 up to 1.7 GHz
• Dual Core Arm R5F up to 750 MHz
• DSP Engines up to 1968
• 4 or 8GB DDR4-3200 64-bit PS memory with 8-bit ECC
• 2GB LPDDR4-2133 32-bit PL memory
• 512MB (2x 2Gb) QSPI NOR, eMMC 256GB, MRAM 512KB
• 12x MGTY on VPX-P1, PCIe Up to Gen4 support
• 2x ETH 1000Base-X/SGMII on VPX-P1 Control Plane
• 18x GPIOs on VPX-P2
• 1x ETH 1000Base-T on VPX-P2
• 4x RS232 or 2x Full-Duplex RS422 on VPX-P2
• 1x USB 2.0 on VPX-P1
• FMC+ VITA 57.4 site with 68x IOs, up to 24x MGTs.
• Optional 4x Full-Duplex Optical Links VITA 66.4
• Optional 10x NanoRF VITA 67.3
• Smart Power Management using DC/DC with PMBus
• Board Management Controller ARM Cortex-M3 based
• VPX System and IPMI controllers
• Air Cooled and Conduction Cooled
• KVPX Connectors in option

PanaTeQ’s VPX3-VERSA2-MxFE4 is a 3U VPX OpenVPX/SOSA module based on the VERSAL Prime Adaptive SoC device from AMD and one AD9084 Apollo MxFE device from Analog Devices for a broad range of applications such as Software Defined Radio, MILCOM, massive MIMO, Phase Array Radar and Electronic Warfare.

The AD9084 mixed signal front-end (MxFE®) is a highly inte-grated device with a 16-bit, 28 GSPS maximum sample rate, RF digital-to-analog converter (DAC) core, and 12-bit, 20 GSPS maximum sample rate, RF analog-to-digital converter (ADC) core. The AD9084 supports four transmit channels and four receive channels.

The AD9084 is well suited for applications requiring both wide-band ADCs and DACs to process signal(s) having wide instan-taneous bandwidth.

The AD9084 are well suited for applications requiring both wide-band ADCs and DACs to process signal(s) having wide instan-taneous bandwidth.

These devices features a 48 lane, 32.5 Gbps JESD204C or 20 Gbps JESD204B data transceiver port, an on-chip clock multiplier, and a digital signal processing (DSP) capability targeted at either wideband or multiband, direct to RF applications.

The AD9084 also features a bypass mode that allows the full bandwidth capability of the ADC and/or DAC cores to bypass the DSP datapaths

The VERSAL Prime integrates a Dual-core ARM Cortex-A72 based Application Processing Unit (APU), a Dual-core ARM Cortex-R5F based Real-Time Processing Unit (RPU), DSP Engines and a large Programmable Logic (PL) in a single device.  It also includes on-chip memory, external memory interfaces, and a rich set of peripheral connectivity interfaces.

The board can be ordered with different versions of the VERSAL family of devices, coupled up to 4 or 8GB 64-bit DDR4-3200   Processing Memory with 8-bit ECC.

2GB 32-bit of LPDDR4-2133 is also available as the Programmable Logic Memory, allowing data streaming applications such as video   CODEC and signal processing. 256GB of soldered eMMC managed NAND Flash is available for local data storage.

The VPX3-VERSA2 uses advanced DC/DC power modules from Linear Technology using PMBus and PanaTeQ’s Smart Power Management technology.

The board can act as a Single Board Computer in the VPX system. When the VPX3-VERSA2 is System Controller, there is no need to add any SBC in the VPX System, improving Size, Weight, Power and Cost (SWaP-C).

A large number of the peripherals are available on the VPX backplane: 1x ETH 1000Base-T, 1x USB 2.0, 4x RS-232 or 2x Full-Duplex RS-422, 16x GPIOs, 2x CAN-FD.

• 3U OpenVPX module, Air-Cooled or Conduction Cooled
• AMD Zynq Ultrascale+ MPSoC ZU6/ZU9/ZU15 FFVC900 Package
• 4/8GB PS DDR4-2400 memory 64-bit, 8-bit ECC
• 1/2GB PL DDR4-2400 memory 16-bit, no ECC
• Up to 256 GB eMMC managed NAND Flash
• FMC HPC site with 10x MGTs @ up to 16.3Gb/s
• Analog Devices ADRV9026 Wideband RF Transceiver
• Quad Transmitter (Tx), Quad Receiver (Rx)
• Reference Clock Input
• RF Coverage 300MHz to 6.0 GHz
• Tx Synthesis Bandwidth (BW) to 50MHz
• Rx Bandwidth: Up to 200MHz
• Support TDD and FDD Applications
• On-Board VCXO @ 122.88MHz.

PanaTeQ’s VPX3-ZU1B-SDR-DB is a 3U OpenVPX modules based on the Zynq UltraScale+ MPSoC device from AMD coupled to RadioVerse Analog Devices RF Wideband Transceiver ADRV9026 for a broad range of applications such as Software Defined Radio, MILCOM, massive MIMO, Phase Array Radar and Electronic Warfare.

PanaTeQ provides solutions for Ruggedized Air-Cooled and Conduction Cooled systems.rnrnThese VPX3-ZU1B-SDR-DB module is based on the following PanaTeQ’s sub-modules (boards):rnrnThe VPX3-ZU1B is a 3U OpenVPX module based on a AMD Zynq Ultrascale+ MPSoC with a FMC 57.1 site, HW/SW compatible with ZCU102 Evaluation board from AMD.

The FMC-ZU3RF-B is a FMC based on an Analog Devices ADRV9026

• 3U OpenVPX module, Air-Cooled or Conduction Cooled
• AMD Zynq Ultrascale+ MPSoC ZU6/ZU9/ZU15 FFVC900 Package
• 4/8GB PS DDR4-2400 memory 64-bit, 8-bit ECC
• 1/2GB PL DDR4-2400 memory 16-bit, no ECC
• Up to 256 GB eMMC managed NAND Flash
• FMC HPC site with 10x MGTs @ up to 16.3Gb/s
• Analog Devices ADRV9029 Wideband RF Transceiver
• Quad Transmitter (Tx), Quad Receiver (Rx)
• Reference Clock Input
• RF Coverage 300MHz to 6.0 GHz
• Tx Synthesis Bandwidth (BW) to 50MHz
• Rx Bandwidth: Up to 200MHz
• Support TDD and FDD Applications
• On-Board VCXO @ 122.88MHz.

PanaTeQ’s VPX3-ZU1B-SDR-D is a 3U OpenVPX modules based on the Zynq UltraScale+ MPSoC device from AMD coupled to RadioVerse Analog Devices RF Wideband Transceiver ADRV9029 for a broad range of applications such as Software Defined Radio, MILCOM, massive MIMO, Phase Array Radar and Electronic Warfare.

PanaTeQ provides solutions for Ruggedized Air-Cooled and Conduction Cooled systems.rnrnThese VPX3-ZU1B-SDR-D module is based on the following PanaTeQ’s sub-modules (boards):rnrnThe VPX3-ZU1B is a 3U OpenVPX module based on a AMD Zynq Ultrascale+ MPSoC with a FMC 57.1 site, HW/SW compatible with ZCU102 Evaluation board from AMD.

The FMC-ZU3RF-A is a FMC based on an Analog Devices ADRV9029

• 3U VITA 46.0 46.4 65.0 57.1 Compliant
• AMD Zynq UltraScale+ MPSoC
• ZU4/ZU5/ZU7 CG/EG/EV FBVB-900 Package
• Up to 8GB DDR4-2400 64-bit PS memory with 8-bit ECC
• Up to 2GB DDR4-2400 16-bit PL memory
• Up to 256GB eMMC (V4.51)
• MRAM 512KB
• On-board PCIe Gen2 Switch 16-Lanes 16-Ports with NT support
• 4x MGT on VPX-P1 Expansion Plane
• 1x Display Port 1.2 Video Out on VPX-P2
• 2x ETH 1000Base-X/SGMII on VPX-P1 Control Plane
• 2x ETH 1000Base-T on VPX-P2
• 4x USB 2.0, 1x SATA 3.1 on VPX-P2
• 20x LVCMOS or 10x LVDS GPIO on VPX-P2
• 2x RS.232/422/485, 1x CAN 2.0B on VPX-P2
• FMC HPC site with 90x IO / 45x LVDS, 10x MGT
• Board Management Controller ARM Cortex-M3 based
• Smart Power Management using 4x LTM467x with PMBus
• VPX System Controller
• Air Cooled and Conduction Cooled

PanaTeQ’s VPX3-ZU2 is a 3U OpenVPX module based on the Zynq UltraScale+ MultiProcessor SoC device from AMD.

The Zynq UltraScale+ integrates a Quad-core ARM Cortex-A53 based Application Processing Unit (APU), a Dual-core ARM Cortex-R5 based Real-Time Processing Unit (RPU), a ARM MALI-400 based Graphic Processing Unit (GPU), a Video CODEC H.264/H.265 (EV devices only) and an UltraScale+ Programmable Logic (PL) in a single device.  It also includes on-chip memory, external memory  interfaces, and a rich set of peripheral connectivity interfaces.

The board can be ordered with different versions of the Zynq        UltraScale+ family of devices, coupled up to 8GB 64-bit DDR4-2400 Processing Memory with 8-bit ECC.

Up to 2GB 16-bit of DDR4-2400 is also available as the Programmable Logic Memory, allowing data streaming applications such as video CODEC and signal processing.

Up to 256GB of soldered eMMC managed NAND Flash is available for local data storage.

The VPX3-ZU2 uses four advanced DC/DC power modules from    Linear Technology with PMBus and PanaTeQ’s Smart Power     Management technology.

For front-end I/O  interfaces, an on-board FMC site compliant to the Vita 57.1 HPC standard with 90 SE IO (45 Diff Pairs) and 10 MGT, allowing a wide range of applications such as Software Defined Radio, Video Camera Processing, advanced Multi-Axes Motors controller, Multi-Gig Ethernet Communications, LIDAR/RADAR/SONAR.

The board can act as a Single Board Computer in the VPX system thanks to its on-board PCIe Gen2 Switch. When the VPX3-ZU2 is System Controller, it can manage up to eight 3U OpenVPX slots with a PCIe x1 Gen2 link per slot. There is no need to add any SBC in the VPX System, improving Size, Weight, Power and Cost (SWaP-C).

A large number of the Zynq Ultrascale+ PS peripherals are available on the VPX backplane: 2x ETH 1000Base-T, 4x USB 2.0, 1x SATA 3.1, 1x CAN-2.0B, 2x RS-232/422/485, 4x MGT, 20x GPIO, Video Out Display Port 1.2.

The air cooled PanaTeQ System Development Kit VPX3-ZU2-PSDK is available for the developers and includes a lab chassis, the VPX3-ZU2 and RTM-ZU1 boards, a PentaLinux BSP, the PanaTeQ FPGA Design Kit (PAN-FDK) and cables.

• 3U VITA 46.0 46.4 46.6 46.11 48.1 48.2 65.0 Compliant
• SOSA aligned, VITA 67.3D VITA 66.4

AMD Zynq UltraScale+ RFSoC Gen3

• ZU47/48DR FFVG1517 Package
• Quad-Core Cortex-A53 up to 1.3GHz
• Dual-Core Cortex-R5F up to 533MHz
• 4/8GB DDR4-2400 64-bit PS memory with 8-bit ECC
• eMMC 128GB, MRAM 512KB
• 4/8GB DDR4-2400 64-bit PL memory

Integrated RF Data Converter Subsystem

• 8x 14-bit 5GS/s ADCs, 8x 14-bit 10 GS/s DACs
• Optional Front RF SSMC Connectors
• Optional Rear RF VITA 67.3D NanoRF Connectors
• 2x GTYx4 (FPA & FPB) on VPX
• 2x ETH 1000Base-BX on VPX Control Plane
• 1x ETH 1000Base-T on VPX
• LVCMOS or 10x LVDS GPIO on VPX
• 1x USB 3.0, 2x RS.232/422/485, LVCMOS GPIO on VPX
• Board Management Controller ARM Cortex-M3 based
• Smart Power Management technology
• Board Management Controller SmartFusion based
• VPX System Controller
• Air Cooled and Conduction Cooled

PanaTeQ’s VPX3-RFSOC-B is a 3U VPX module based on the Zynq UltraScale+ RFSoC Gen3 device from Xilinx.

The board is build around ZU47/48DR RFSOC with Front Analog I/O and Rear Analog I/O (8x ADC, 8x DAC, 2x REFCLKIN, 2x TRIGGER)

The board design is SOSA Aligned.

The Zynq® UltraScale+™ RFSoC family integrates key subsystems for multiband, multi-mode cellular radios and cable infrastructure (DOCSIS) into an SoC platform that contains a feature-rich 64-bit quad-core ARM® Cortex™-A53 and    dual-core ARM Cortex-R5F based processing system.

Combining the processing system with UltraScale™ architecture programmable logic and RF-ADCs, RF-DACs, and soft-decision FECs, the Zynq UltraScale+ RFSoC family is capable of implementing a complete software-defined radio including direct RF sampling data converters, enabling CPRI™ and gigabit Ethernet-to-RF on a single, highly programmable SoC.

Zynq UltraScale+ RFSoCs integrate up to 8 channels of RF-ADCs and RF-DACs. The RF-ADCs can sample input frequencies up to 6GHz at 5GSPS with excellent noise spectral density. The RF-DACs generate output carrier frequencies up to 6GHz using the 2nd Nyquist zone with excellent noise spectral density at an update rate of 10.554GSPS.

The RF data converters also include power efficient digital down converters (DDCs) and digital up converters (DUCs) that include programmable interpolation and decimation, NCO, and complex mixer. The DDCs and DUCs can also support dual-band operation. The soft-decision FEC (SD-FEC) is a highly flexible forward error correction engine capable of operating in Turbo decoding mode for wireless applications such as LTE and LDPC encode/decode mode used in 5G wireless, backhaul, and DOCSIS 3.1 cable modems.

The board can be ordered with different versions of the Zynq UltraScale+ RFSoC family of devices, coupled up to 8GB 64-bit DDR4-2400 Processing Memory with 8-bit ECC.

Up to 8GB 64-bit of DDR4-2400 is also available as the Programmable Logic Memory, allowing data streaming signal processing applications. 64GB of soldered eMMC managed NAND Flash is available for local data storage.

Frond-end and Rear Analog I/O  interfaces are available using on-board SSMC or VITA 67.3 NanoRF connectors depending of the models.

PanaTeQ offers the VPX3-RFSOC-B-PSDK-B System Development Kit. Please contact us for more details.

• 3U VPX RTM (100 x 81.5 mm)
• VITA 46.0, 46.10, 65.0 specifications compliant
• 0.8 or 1 Inch Rear Panel Width
• Dual 100/1000 Base-T RJ-45 with status Leds connectors
• Dual USB 3.0/2.0 Type-A stacked connectors
• Dual USB 2.0 Type-A stacked connectors
• Mini DisplayPort 1.2 Video Output connector
• SATA 3.1 on-board vertical connector
• Micro USB on-board vertical UART for VPX3-ZU1 Zynq
• Micro USB on-board vertical UART for VPX3-ZU1 BMC
• 10x LVDS / 20x GPIOs on-board 20-pin vertical connector
• 2x RS-232/422/CAN on-board 10-pin vertical connector
• Power Monitor (VS1, VS2, VS3) with status LEDs
• On-board Xilinx JTAG Programming/Debuging connector
• On-board Push-Button VPX SysReset
• On-board Socket for Battery sourcing VPX VBAT

The RTM-ZU1-A is an 3U VPX Rear IO Transition Module for the VPX3-ZU1B 3U VPX AMD Zynq Ultrascale+ MPSoC module from PanaTeQ.

The following interfaces are available through the Rear Panel connectors:

• 2x Ethernet 100/1000BaseT RJ-45 connectors
• 2x USB 3.0 Type-A stacked connectors
• 2x USB 2.0 Type-A stacked connectors
• 1x mini Display Port 1.2 video output connector

Also these interfaces are available using the on-board vertical connectors.

• 1x SATA 3.1
• 1x micro USB UART Zynq
• 1x micro USB UART BMC
• 20-pin for 20x GPIOs
• 10-pin 2x RS-232/422/485 + 2x CAN-bus
• 14-pin standard Xilinx JTAG Prog/Debug
• Battery Socket VPX VBAT
• Push-Button VPX SysReset
• Main VPX Power Monitoring (VS1, VS2, VS3)

The air cooled PanaTeQ System Development Kit  VPX3-ZU1B-PSDK-A is available for the developers and includes a 4U lab chassis with 3/5 slots, the VPX3 -ZU1B-B1M-AS and RTM-ZU1-A boards, a Linux BSP, the PanaTeQ reference designs.

• 3U VITA 46.0 46.4 46.6 46.11 48.1 48.2 65.0 Compliant
• OpenVPX aligned, VITA 67.3D
• AMD Zynq UltraScale+ RFSoC Gen3
• ZU43DR FFVE1156 Package
• Quad-Core Cortex-A53 up to 1.3GHz
• Dual-Core Cortex-R5F up to 533MHz
• 4/8GB DDR4-2400 64-bit PS memory with 8-bit ECC
• eMMC 128GB, MRAM 512KB
• 2/4GB DDR4-2400 32-bit PL memory
• Integrated RF Data Converter Subsystem
• 4x 14-bit 5GS/s ADCs, 4x 14-bit 10 GS/s DACs
• Optional Front RF SSMC Connectors
• Optional Rear RF VITA 67.3D NanoRF Connectors
• 2x GTYx4 (FPA & FPB) on VPX
• 2x ETH 1000Base-BX on VPX Control Plane
• 2x ETH 1000Base-T on VPX
• 4x USB 2.0, 4x RS.232/485, 20x LVCMOS or 10x LVDS GPIO on VPX
• Board Management Controller ARM Cortex-M3 based
• Smart Power Management technology
• Board Management Controller SmartFusion based
• VPX System Controller
• Air Cooled and Conduction Cooled

PanaTeQ’s VPX3-RFSOC is a 3U VPX module based on the Zynq UltraScale+ RFSoC Gen3 device from Xilinx.

The board is build around a ZU43DR RFSOC with Front and Rear Analog I/O (4x ADC, 4x DAC, 1x REFCLKIN, 1x TRIGGER)

The Zynq® UltraScale+™ RFSoC family integrates key subsystems for multiband, multi-mode cellular radios and cable infrastructure (DOCSIS) into an SoC platform that contains a feature-rich 64-bit quad-core ARM® Cortex™-A53 and    dual-core ARM Cortex-R5F based processing system.

Combining the processing system with UltraScale™ architecture programmable logic and RF-ADCs, RF-DACs, and soft-decision FECs, the Zynq UltraScale+ RFSoC family is capable of implementing a complete software-defined radio including direct RF sampling data converters, enabling CPRI™ and gigabit Ethernet-to-RF on a single, highly programmable SoC.

Zynq UltraScale+ RFSoCs integrate up to 8 channels of RF-ADCs and RF-DACs. The RF-ADCs can sample input frequencies up to 6GHz at 5GSPS with excellent noise spectral density. The RF-DACs generate output carrier frequencies up to 6GHz using the 2nd Nyquist zone with excellent noise spectral density at an update rate of 10.554GSPS.

The RF data converters also include power efficient digital down converters (DDCs) and digital up converters (DUCs) that include programmable interpolation and decimation, NCO, and complex mixer. The DDCs and DUCs can also support dual-band operation. The soft-decision FEC (SD-FEC) is a highly flexible forward error correction engine capable of operating in Turbo decoding mode for wireless applications such as LTE and LDPC encode/decode mode used in 5G wireless, backhaul, and DOCSIS 3.1 cable modems.

The board can be ordered with different versions of the Zynq UltraScale+ RFSoC family of devices, coupled up to 8GB 64-bit DDR4-2400 Processing Memory with 8-bit ECC.

Up to 2/4GB 32/64-bit of DDR4-2400 is also available as the Programmable Logic Memory, allowing data streaming signal processing applications. 256GB of soldered eMMC managed NAND Flash is available for local data storage.

Frond-end and Rear Analog I/O  interfaces are available using on-board SSMC or VITA 67.3 NanoRF connectors depending of the models.

A large number of the Zynq Ultrascale+ RFSOC PS peripherals are available on the VPX backplane: ETH 1000Base-T, USB 2.0, RS-232/422/485, GPIOs.

PanaTeQ offers the VPX3-RFSOC-A-PSDK-A System Development Kit.

• 3U VITA 46.0, 46.4, 46.6, 65.0 Compliant
• SOSA Aligned version VPX3-VERSA-RF-AS
• AMD VERSAL RF Series based
• VR1602/VR1652 VSVG1596 Package
• Dual Core Arm A72 up to 1.7 GHz
• Dual Core Arm R5F up to 750 MHz
• AI Engine Tiles 126
• DSP Engines 2256
• 4 or 8GB DDR4-3200 64-bit PS memory with 8-bit ECC
• 2GB LPDDR4-2133 32-bit PL memory
• 512MB (2x 2Gb) QSPI NOR
• eMMC 256GB
• MRAM 512KB
• 8x MGTY on VPX-P1, PCIe Up to Gen4 support
• 2x ETH 1000Base-X/SGMII on VPX-P1 Control Plane
• 16x GPIOs on VPX-P2
• 1x ETH 1000Base-T on VPX-P2
• 4x RS232 or 2x Full-Duplex RS422 on VPX-P2
• 1x USB 2.0 on VPX-P1
• Optional 4x Full-Duplex Optical Links VITA 66.4
• Optional Front-End connector or Backplane VITA 67.3 10x nanoRF
• Smart Power Management using DC/DC with PMBus
• Board Management Controller ARM Cortex-M3 based
• VPX System and IPMI controllers
• Air Cooled and Conduction Cooled
• KVPX Connectors in option

PanaTeQ’s VPX3-VERSA-RF-A is a 3U VPX module based on the VERSAL RF Adaptative Compute Acceleration Platform (ACAP) device from AMD. It support the RF series VR1602 or VR1652 devices.

The VERSAL RF integrate a Dual-core ARM Cortex-A72 based Application Processing Unit (APU), a Dual-core ARM Cortex-R5F based Real-Time Processing Unit (RPU), AI Engines, DSP Engines and a large Programmable Logic (PL) in a single device.  It also includes on-chip memory, external memory interfaces, and a rich set of peripheral connectivity interfaces.

The VERSAL RF integrate up to eight 14-bit (with calibration), 32 GSPS RF-ADCs with hard DUC and DDC IP enable fast, high resolution, flexible wide-spectrum characterization.

Eight 14-bit (with calibration), 16 GSPS RF-DACs provide RF transmit functions.

18 GHz I/O instantaneous bandwidth enables a wider input frequency pipe.

The board can be ordered with different versions of the VERSAL RF family of devices, coupled up to 4 or 8GB 64-bit DDR4-3200   Processing Memory with 8-bit ECC.

2GB 32-bit of LPDDR4-2133 is also available as the Programmable Logic Memory, allowing data signal processing.

256GB of soldered eMMC managed NAND Flash is available for local data storage.

The VPX3-VERSA-RF-A uses advanced DC/DC power modules from Linear Technology using PMBus and PanaTeQ’s Smart Power Management technology.

The board can act as a Single Board Computer in the VPX system. When the VPX3-VERSA-RF-A is System Controller, there is no need to add any SBC in the VPX System, improving Size, Weight, Power and Cost (SWaP-C).

A large number of the peripherals are available on the VPX backplane: 1x ETH 1000Base-T, 1x USB 2.0, 4x RS-232 or 2x Full-Duplex RS-422, 16x GPIOs, 2x CAN-FD.

The air cooled PanaTeQ System Development Kit VPX3-VERSA-RF-A-PSDK is offered for the developers.

• 3U OpenVPX module, Air-Cooled
• AMD Zynq Ultrascale+ MPSoC ZU9G-1FFVC900E
• 4GB PS DDR4-2400 memory 64-bit, 8-bit ECC
• 1GB PL DDR4-2400 memory 16-bit, no ECC
• 64 GB eMMC managed NAND Flash
• FMC HPC site with 10x MGTs @ up to 16.3Gb/s
• 2 RF Channels, DC to 6 GHz acquisition
• Software tunable Channel Bandwidth 200 kHz-56 MHz
• 2 x Multiple Synchronized Input and output
• AD9361 Dual 12 bits transceivers
• Tunable RF Bandpass Filters
• AD9656 Dual 16 bits AD converter (for baseband RF)

PanaTeQ’s VPX3-ZU1B-SDR400 is a 3U OpenVPX modules based on the Zynq UltraScale+ MPSoC device from AMD coupled to RadioVerse Analog Devices RF Wideband Transceiver AD9361 for a broad range of applications such as Software Defined Radio, MILCOM, massive MIMO, Phase Array Radar and Electronic Warfare.rnrnPanaTeQ provides solutions for Ruggedized Air-Cooled and Conduction Cooled systems.

These VPX3-ZU1B-SDR400 module is based on the following PanaTeQ’s sub-modules (boards):rnrnThe VPX3-ZU1B is a 3U OpenVPX module based on a AMD Zynq Ultrascale+ MPSoC with a FMC 57.1 site, HW/SW compatible with ZCU102 Evaluation board from AMD.

The FMC-SDR400 is a FMC based on an Analog Devices AD9361.

• 3U VITA 46.0, 46.4, 46.6, 65.0 Compliant
• Optional SOSA Aligned version VPX3-VERSA2S
• AMD VERSAL Prime Gen1 Series based
• VM1502/1802 VSVC1760 Package
• Dual Core Arm A72 up to 1.7 GHz
• Dual Core Arm R5F up to 750 MHz
• DSP Engines up to 1968
• 4GB or 8GB DDR4-3200 64-bit PS memory with 8-bit ECC
• 4GB LPDDR4-2133 32-bit PL memory
• 512MB (2x 2Gb) QSPI NOR
• 256 GB eMMC
• 512KB MRAM
• 12x MGTY on VPX-P1, PCIe Up to Gen4 support
• 2x ETH 1000Base-X/SGMII on VPX-P1 Control Plane
• 16x GPIOs on VPX-P2A
• 1x ETH 1000Base-T on VPX-P2A
• 4x RS232 or 2x Full-Duplex RS422 on VPX-P2A
• 1x USB 2.0 on VPX-P1
• FMC+ VITA 57.4 site with 68x IOs, up to 24x MGTs.
• Optional VITA 66.4 Full-Duplex Optical Interfaces for 40Gb (4x 10Gbps) or 100Gb (4x 25Gbps) with 10 nanoRF VITA67.3
• Smart Power Management using DC/DC with PMBus
• Board Management Controller ARM Cortex-M3 based
• VPX System and IPMI controllers
• Air Cooled and Conduction Cooled
• KVPX Connectors in option

PanaTeQ’s VPX3-VERSA2 is a 3U OpenVPX module based on the VERSAL Adaptative Compute Acceleration Platform (ACAP) GEN1 device from Xilinx. It support the Prime series VM1502 or VM1802

The VERSAL integrates a Dual-core ARM Cortex-A72 based Application Processing Unit (APU), a Dual-core ARM Cortex-R5F based Real-Time Processing Unit (RPU), DSP Engines and a large Programmable Logic (PL) in a single device.  It also includes on-chip memory, external memory interfaces, and a rich set of peripheral connectivity interfaces.

The board can be ordered with different versions of the VERSAL family of devices, coupled up to 4 or 8GB 64-bit DDR4-3200   Processing Memory with 8-bit ECC.

4GB 32-bit of LPDDR4-2133 is also available as the Programmable Logic Memory, allowing data streaming applications such as video   CODEC and signal processing. 256GB of soldered eMMC managed NAND Flash is available for local data storage.

The VPX3-VERSA2 uses advanced DC/DC power modules from Linear Technology using PMBus and PanaTeQ’s Smart Power Management technology.

For front-end I/O  interfaces, an on-board FMC+ site compliant to the Vita 57.4 HPC standard with 68 SE IO (34 Diff Pairs) and 24 MGTs, allowing a wide range of applications such as EW warfare systems, High-Speed Communication, LIDAR/RADAR/SONAR.

The board can act as a Single Board Computer in the VPX system. When the VPX3-VERSA2 is System Controller, there is no need to add any SBC in the VPX System, improving Size, Weight, Power and Cost (SWaP-C).

A large number of the peripherals are available on the VPX backplane: 1x ETH 1000Base-T, 1x USB 2.0, 4x RS-232 or 2x Full-Duplex RS-422, 16x GPIOs, 1x CAN-FD.

The air cooled PanaTeQ System Development Kit VPX3-VERSA2-PSDK is available for the developers and includes a lab chassis with 3-slots Centralized backplane, the VPX3-VERSA2-A1M-AS and RTM-VERSA2 boards, a PentaLinux BSP, PanaTeQ FPGA Design References and cables.