• 3U OpenVPX module, Air-Cooled or Conduction Cooled
• AMD Zynq Ultrascale+ MPSoC ZU6/ZU9/ZU15 FFVC900 Package
• 4/8GB PS DDR4-2400 memory 64-bit, 8-bit ECC
• 1/2GB PL DDR4-2400 memory 16-bit, no ECC
• Up to 256 GB eMMC managed NAND Flash
• FMC HPC site with 10x MGTs @ up to 16.3Gb/s
• Analog Devices ADRV9026 Wideband RF Transceiver
• Quad Transmitter (Tx), Quad Receiver (Rx)
• Reference Clock Input
• RF Coverage 300MHz to 6.0 GHz
• Tx Synthesis Bandwidth (BW) to 50MHz
• Rx Bandwidth: Up to 200MHz
• Support TDD and FDD Applications
• On-Board VCXO @ 122.88MHz.

PanaTeQ’s VPX3-ZU1B-SDR-DB is a 3U OpenVPX modules based on the Zynq UltraScale+ MPSoC device from AMD coupled to RadioVerse Analog Devices RF Wideband Transceiver ADRV9026 for a broad range of applications such as Software Defined Radio, MILCOM, massive MIMO, Phase Array Radar and Electronic Warfare.

PanaTeQ provides solutions for Ruggedized Air-Cooled and Conduction Cooled systems.rnrnThese VPX3-ZU1B-SDR-DB module is based on the following PanaTeQ’s sub-modules (boards):rnrnThe VPX3-ZU1B is a 3U OpenVPX module based on a AMD Zynq Ultrascale+ MPSoC with a FMC 57.1 site, HW/SW compatible with ZCU102 Evaluation board from AMD.

The FMC-ZU3RF-B is a FMC based on an Analog Devices ADRV9026

• RF Transceiver Analog Devices ADRV9026 based FMC
• Vita 57.1-2010 specification compliant
• FMC High Pin Connector (HPC)
• JESD024B/C interface up to 24.33 Gbps
• 4x Tx Lanes
• 4x Rx Lanes
• LA Bus LVDS and Singled-Ended
• Operates with VAdj = 2.5V to 1.5V
• Air and Conduction Cooled compatible
• Quad Transmitters (Tx)
• Quad Receivers (Rx)
• Ext_Lo Input/Ouput
• External Reference Clock Input
• RF Coverage: 75MHz to 6.0 GHz
• Tx Synthesis Bandwidth Max: 450MHz
• Rx Bandwidth Max: 200MHz
• Support Time Division Duplex (TDD)
• Support Frequency Time Division (FTD)
• Fully integrated independent fractional-N radio frequency synthesizers
• On-board VCXO : 100.000MHz, 122.880MHz, 125.000MHz, 153.600MHz or 156.250MHz
• Air Cooled and Conduction Cooled

The FMC-ZU3RF-B is a FMC for RF wireless communications applications based on the ADRV9026 component from Analog Device Inc (ADI).

The ADRV9026 is a highly integrated, radio frequency (RF) agile transceiver offering four independently controlled transmitters, dedicated observation receiver inputs for monitoring each transmitter channel, four independently controlled receivers, integrated synthesizers, and digital signal processing functions providing a complete transceiver solution.

The device provides the performance demanded by cellular infrastructure applications, such as small cell base station radios, macro 3G/4G/5G systems, and massive multiple in/multiple out (MIMO) base stations.

The receiver subsystem consists of four independent, wide bandwidth, direct conversion receivers with wide dynamic range.

The four independent transmitters use a direct conversion modulator resulting in low noise operation with low power consumption. The device also includes two wide bandwidth, time shared, observation path receivers with two inputs each for monitoring transmitter outputs. The complete transceiver subsystem includes automatic and manual attenuation control, dc offset correction, quadrature error correction (QEC), and digital filtering, eliminating the need for these functions in the digital baseband.

Other auxiliary functions such as analog-to-digital converters (ADCs), digital- to-analog converters (DACs), and general-purpose input/ outputs (GPIOs) that provide an array of digital control options are also integrated. To achieve a high level of RF performance, the transceiver includes five fully integrated phase-locked loops (PLLs). Two PLLs provide low noise and low power fractional-N RF synthesis for the transmitter and receiver signal paths.

A third fully integrated PLL supports an independent local oscillator (LO) mode for the observation receiver. The fourth PLL generates the clocks needed for the converters and digital circuits, and a fifth PLL provides the clock for the serial data interface. A multichip synchronization mechanism synchronizes the phase of all LOs and baseband clocks between multiple ADRV9029 chips.

All voltage controlled oscillators (VCOs) and loop filter components are integrated and adjustable through the digital control interface.

PanaTeQ offers the VPX3-ZU1B-SDR-DB development system based on the VPX3-ZU1B 3U OpenVPX Zynq Ultrascale+ and the FMC-ZU3RF-B-W1A-AS for typical Software Defined Radio application, in both air-cooled and conduction cooled version.