• 3U OpenVPX module, Air-Cooled or Conduction Cooled
• AMD Zynq Ultrascale+ MPSoC ZU6/ZU9/ZU15 FFVC900 Package
• 4/8GB PS DDR4-2400 memory 64-bit, 8-bit ECC
• 1/2GB PL DDR4-2400 memory 16-bit, no ECC
• Up to 256 GB eMMC managed NAND Flash
• FMC HPC site with 10x MGTs @ up to 16.3Gb/s
• Analog Devices ADRV9026 Wideband RF Transceiver
• Quad Transmitter (Tx), Quad Receiver (Rx)
• Reference Clock Input
• RF Coverage 300MHz to 6.0 GHz
• Tx Synthesis Bandwidth (BW) to 50MHz
• Rx Bandwidth: Up to 200MHz
• Support TDD and FDD Applications
• On-Board VCXO @ 122.88MHz.

PanaTeQ’s VPX3-ZU1B-SDR-DB is a 3U OpenVPX modules based on the Zynq UltraScale+ MPSoC device from AMD coupled to RadioVerse Analog Devices RF Wideband Transceiver ADRV9026 for a broad range of applications such as Software Defined Radio, MILCOM, massive MIMO, Phase Array Radar and Electronic Warfare.

PanaTeQ provides solutions for Ruggedized Air-Cooled and Conduction Cooled systems.rnrnThese VPX3-ZU1B-SDR-DB module is based on the following PanaTeQ’s sub-modules (boards):rnrnThe VPX3-ZU1B is a 3U OpenVPX module based on a AMD Zynq Ultrascale+ MPSoC with a FMC 57.1 site, HW/SW compatible with ZCU102 Evaluation board from AMD.

The FMC-ZU3RF-B is a FMC based on an Analog Devices ADRV9026

• 3U OpenVPX module, Air-Cooled or Conduction Cooled
• AMD Zynq Ultrascale+ MPSoC ZU6/ZU9/ZU15 FFVC900 Package
• 4/8GB PS DDR4-2400 memory 64-bit, 8-bit ECC
• 1/2GB PL DDR4-2400 memory 16-bit, no ECC
• Up to 256 GB eMMC managed NAND Flash
• FMC HPC site with 10x MGTs @ up to 16.3Gb/s
• Analog Devices ADRV9029 Wideband RF Transceiver
• Quad Transmitter (Tx), Quad Receiver (Rx)
• Reference Clock Input
• RF Coverage 300MHz to 6.0 GHz
• Tx Synthesis Bandwidth (BW) to 50MHz
• Rx Bandwidth: Up to 200MHz
• Support TDD and FDD Applications
• On-Board VCXO @ 122.88MHz.

PanaTeQ’s VPX3-ZU1B-SDR-D is a 3U OpenVPX modules based on the Zynq UltraScale+ MPSoC device from AMD coupled to RadioVerse Analog Devices RF Wideband Transceiver ADRV9029 for a broad range of applications such as Software Defined Radio, MILCOM, massive MIMO, Phase Array Radar and Electronic Warfare.

PanaTeQ provides solutions for Ruggedized Air-Cooled and Conduction Cooled systems.rnrnThese VPX3-ZU1B-SDR-D module is based on the following PanaTeQ’s sub-modules (boards):rnrnThe VPX3-ZU1B is a 3U OpenVPX module based on a AMD Zynq Ultrascale+ MPSoC with a FMC 57.1 site, HW/SW compatible with ZCU102 Evaluation board from AMD.

The FMC-ZU3RF-A is a FMC based on an Analog Devices ADRV9029

• 3U VITA 46.0 46.4 65.0 57.1 Compliant
• AMD Zynq UltraScale+ MPSoC
• ZU4/ZU5/ZU7 CG/EG/EV FBVB-900 Package
• Up to 8GB DDR4-2400 64-bit PS memory with 8-bit ECC
• Up to 2GB DDR4-2400 16-bit PL memory
• Up to 256GB eMMC (V4.51)
• MRAM 512KB
• On-board PCIe Gen2 Switch 16-Lanes 16-Ports with NT support
• 4x MGT on VPX-P1 Expansion Plane
• 1x Display Port 1.2 Video Out on VPX-P2
• 2x ETH 1000Base-X/SGMII on VPX-P1 Control Plane
• 2x ETH 1000Base-T on VPX-P2
• 4x USB 2.0, 1x SATA 3.1 on VPX-P2
• 20x LVCMOS or 10x LVDS GPIO on VPX-P2
• 2x RS.232/422/485, 1x CAN 2.0B on VPX-P2
• FMC HPC site with 90x IO / 45x LVDS, 10x MGT
• Board Management Controller ARM Cortex-M3 based
• Smart Power Management using 4x LTM467x with PMBus
• VPX System Controller
• Air Cooled and Conduction Cooled

PanaTeQ’s VPX3-ZU2 is a 3U OpenVPX module based on the Zynq UltraScale+ MultiProcessor SoC device from AMD.

The Zynq UltraScale+ integrates a Quad-core ARM Cortex-A53 based Application Processing Unit (APU), a Dual-core ARM Cortex-R5 based Real-Time Processing Unit (RPU), a ARM MALI-400 based Graphic Processing Unit (GPU), a Video CODEC H.264/H.265 (EV devices only) and an UltraScale+ Programmable Logic (PL) in a single device.  It also includes on-chip memory, external memory  interfaces, and a rich set of peripheral connectivity interfaces.

The board can be ordered with different versions of the Zynq        UltraScale+ family of devices, coupled up to 8GB 64-bit DDR4-2400 Processing Memory with 8-bit ECC.

Up to 2GB 16-bit of DDR4-2400 is also available as the Programmable Logic Memory, allowing data streaming applications such as video CODEC and signal processing.

Up to 256GB of soldered eMMC managed NAND Flash is available for local data storage.

The VPX3-ZU2 uses four advanced DC/DC power modules from    Linear Technology with PMBus and PanaTeQ’s Smart Power     Management technology.

For front-end I/O  interfaces, an on-board FMC site compliant to the Vita 57.1 HPC standard with 90 SE IO (45 Diff Pairs) and 10 MGT, allowing a wide range of applications such as Software Defined Radio, Video Camera Processing, advanced Multi-Axes Motors controller, Multi-Gig Ethernet Communications, LIDAR/RADAR/SONAR.

The board can act as a Single Board Computer in the VPX system thanks to its on-board PCIe Gen2 Switch. When the VPX3-ZU2 is System Controller, it can manage up to eight 3U OpenVPX slots with a PCIe x1 Gen2 link per slot. There is no need to add any SBC in the VPX System, improving Size, Weight, Power and Cost (SWaP-C).

A large number of the Zynq Ultrascale+ PS peripherals are available on the VPX backplane: 2x ETH 1000Base-T, 4x USB 2.0, 1x SATA 3.1, 1x CAN-2.0B, 2x RS-232/422/485, 4x MGT, 20x GPIO, Video Out Display Port 1.2.

The air cooled PanaTeQ System Development Kit VPX3-ZU2-PSDK is available for the developers and includes a lab chassis, the VPX3-ZU2 and RTM-ZU1 boards, a PentaLinux BSP, the PanaTeQ FPGA Design Kit (PAN-FDK) and cables.

• 3U OpenVPX module, Air-Cooled
• AMD Zynq Ultrascale+ MPSoC ZU9G-1FFVC900E
• 4GB PS DDR4-2400 memory 64-bit, 8-bit ECC
• 1GB PL DDR4-2400 memory 16-bit, no ECC
• 64 GB eMMC managed NAND Flash
• FMC HPC site with 10x MGTs @ up to 16.3Gb/s
• 2 RF Channels, DC to 6 GHz acquisition
• Software tunable Channel Bandwidth 200 kHz-56 MHz
• 2 x Multiple Synchronized Input and output
• AD9361 Dual 12 bits transceivers
• Tunable RF Bandpass Filters
• AD9656 Dual 16 bits AD converter (for baseband RF)

PanaTeQ’s VPX3-ZU1B-SDR400 is a 3U OpenVPX modules based on the Zynq UltraScale+ MPSoC device from AMD coupled to RadioVerse Analog Devices RF Wideband Transceiver AD9361 for a broad range of applications such as Software Defined Radio, MILCOM, massive MIMO, Phase Array Radar and Electronic Warfare.rnrnPanaTeQ provides solutions for Ruggedized Air-Cooled and Conduction Cooled systems.

These VPX3-ZU1B-SDR400 module is based on the following PanaTeQ’s sub-modules (boards):rnrnThe VPX3-ZU1B is a 3U OpenVPX module based on a AMD Zynq Ultrascale+ MPSoC with a FMC 57.1 site, HW/SW compatible with ZCU102 Evaluation board from AMD.

The FMC-SDR400 is a FMC based on an Analog Devices AD9361.

• 3U OpenVPX module, Air-Cooled
• AMD Zynq Ultrascale+ MPSoC ZU6/ZU9/ZU15 FFVC900E package
• Up to 8GB PS DDR4-2400 memory 64-bit, 8-bit ECC
• Up to 2GB PL DDR4-2400 memory 16-bit, no ECC
• Up to 256 GB eMMC managed NAND Flash
• FMC HPC site with 10x MGTs @ up to 16.3Gb/s
• ADRV9009 Wideband RF Transceiver
• Dual Transmitter (Tx), Dual Receiver (Rx)
• RF Ext LO Input/Output
• Reference Clock Input
• Two GPIO Input/Output

• RF Coverage 75MHz to 6.0 GHz
• Tx Synthesis Bandwidth (BW) to 450MHz
• Rx Bandwidth: Up to 200MHz
• On-Board VCXO @ 122.88MHz.

PanaTeQ’s VPX3-ZU1B-SDR-C is a 3U OpenVPX modules based on the Zynq UltraScale+ MPSoC device from AMD coupled to RadioVerse Analog Devices RF Wideband Transceiver ADRV9009 for a broad range of applications such as Software Defined Radio, MILCOM, massive MIMO, Phase Array Radar and Electronic Warfare.

PanaTeQ provides solutions for Ruggedized Air-Cooled and Conduction Cooled systems.

These VPX3-ZU1B-SDR-C module is based on the following PanaTeQ’s sub-modules (boards):

The VPX3-ZU1B is a 3U OpenVPX module based on a AMD Zynq Ultrascale+ MPSoC with a FMC 57.1 site, HW/SW compatible with ZCU102 Evaluation board from AMD.

The FMC-ZU2RF-A is a FMC based on an Analog Devices ADRV9009, HW/SW compatible with ADRV9009 Evaluation Board from Analog Devices.

• 3U OpenVPX module, Air-Cooled
• AMD Zynq Ultrascale+ MPSoC ZU6/ZU9/ZU15 FFVC900E package
• Up to 8GB PS DDR4-2400 memory 64-bit, 8-bit ECC
• Up to 2GB PL DDR4-2400 memory 16-bit, no ECC
• Up to 256GB eMMC managed NAND Flash
• FMC HPC site with 10x MGTs @ up to 16.3Gb/s
• AD9375 Wideband RF Transceiver
• Dual Transmitter (Tx), Dual Receiver (Rx)
• Observation Receiver (ORx) with 2 inputs
• Sniffer Receiver (SnRx) with 1 input
• Reference Clock Input
• RF Coverage 300MHz to 6.0 GHz
• Tx Synthesis Bandwidth (BW) to 250MHz
• Rx Bandwidth: Up to 100MHz
• On-Board VCXO @ 122.88MHz.

PanaTeQ’s VPX3-ZU1B-SDR-B is a 3U OpenVPX modules based on the Zynq UltraScale+ MPSoC device from AMD coupled to RadioVerse Analog Devices RF Wideband Transceiver AD9375 for a broad range of applications such as Software Defined Radio, MILCOM, massive MIMO, Phase Array Radar and Electronic Warfare.

PanaTeQ provides solutions for Ruggedized Air-Cooled and Conduction Cooled systems.

These VPX3-ZU1B-SDR-B module is based on the following PanaTeQ’s sub-modules (boards):

The VPX3-ZU1B is a 3U OpenVPX module based on a AMD Zynq Ultrascale+ MPSoC with a FMC 57.1 site, HW/SW compatible with ZCU102 Evaluation board from AMD.

The FMC-ZU1RF-B is a FMC based on an Analog Devices AD9375, HW/SW compatible with ADRV9375 Evaluation Board from Analog Devices.

• 3U OpenVPX module, Air-Cooled
• AMD Zynq Ultrascale+ MPSoC ZU6/ZU9/ZU15 FFVC900E package
• Up to 8GB PS DDR4-2400 memory 64-bit, 8-bit ECC
• Up to 2GB PL DDR4-2400 memory 16-bit, no ECC
• Up to  256GB eMMC managed NAND Flash
• FMC HPC site with 10x MGTs @ up to 16.3Gb/s
• AD9371 Wideband RF Transceiver
• Dual Transmitter (Tx), Dual Receiver (Rx)
• Observation Receiver (ORx) with 2 inputs
• Sniffer Receiver (SnRx) with 1 input
• Reference Clock Input
• RF Coverage 300MHz to 6.0 GHz
• Tx Synthesis Bandwidth (BW) to 250MHz
• Rx Bandwidth: Up to 100MHz
• On-Board VCXO @ 122.88MHz.

PanaTeQ’s VPX3-ZU1B-SDR-A is a 3U OpenVPX modules based on the Zynq UltraScale+ MPSoC device from AMD coupled to RadioVerse Analog Devices RF Wideband Transceiver AD9371 for a broad range of applications such as Software Defined Radio, MILCOM, massive MIMO, Phase Array Radar and Electronic Warfare.

PanaTeQ provides solutions for Ruggedized Air-Cooled and Conduction Cooled systems.

These VPX3-ZU1B-SDR-A module is based on the following PanaTeQ’s sub-modules (boards):

The VPX3-ZU1B is a 3U OpenVPX module based on a AMD Zynq Ultrascale+ MPSoC with a FMC 57.1 site, HW/SW compatible with ZCU102 Evaluation board from AMD.

The FMC-ZU1RF-A is a FMC based on an Analog Devices AD9371, HW/SW compatible with ADRV9371 Evaluation Board from Analog Devices.

• 3U Compliant to VITA 46.0, 46.4, 46.6, 65.0, 57.1 standards
• AMD Zynq UltraScale+ MPSoC
• ZU6xG/ZU9xG/ZU15EG FFVC-900 Package
• Up to 8GB DDR4-2400 64-bit PS memory with 8-bit ECC
• Up to 2GB DDR4-2400 16-bit PL memory
• 128MB QSPI NOR
• Up to 256GB eMMC
• 512KB MRAM
• On-board PCIe Gen2 Switch 16-Lanes 16-Ports with NT support
• 4x MGTs on VPX-P1 Expansion Plane
• 1x Display Port 1.2 Video Out on VPX-P2
• 2x ETH 1000Base-BX/SGMII on VPX-P1 Control Plane
• 2x ETH 1000Base-T on VPX-P2
• 4x USB 2.0, 1x SATA 3.1 on VPX-P2
• 20x LVCMOS or 10x LVDS GPIO on VPX-P2
• 2x RS-232/422/485, 1x CAN 2.0B on VPX-P2
• FMC HPC site with 90x IO / 45x LVDS, 10x MGT
• Smart Power Management using 4x LTM467x with PMBus
• Board Management Controller ARM Cortex-M3 based
• VPX System Controller
• Air Cooled and Conduction Cooled
• Optional Conformal Coating and KVPX Connectors

PanaTeQ’s VPX3-ZU1B is a 3U OpenVPX module based on the Zynq UltraScale+ MultiProcessor SoC device from AMD.

This upgraded version provides a dual Ethernet 1000BaseT interfaces on the VPX P2 connector.

The Zynq MPSoC integrates a Quad-core ARM Cortex-A53 based    Application Processing Unit (APU), a Dual-core ARM  Cortex-R5 based Real-Time Processing Unit (RPU), a ARM  MALI-400 based Graphic Processing Unit (GPU) and an UltraScale+ Programmable Logic (PL) in a single device.  It also includes on-chip memory, external memory interfaces, and a rich set of peripheral connectivity interfaces.

The board can be ordered with different versions of the Zynq MPSoC family of devices, coupled up to 8GB 64-bit DDR4-2400   Processing Memory with 8-bit ECC.

Up to 2GB 16-bit of DDR4-2400 is also available as the Programmable Logic Memory, allowing data streaming applications such as video      CODEC and signal processing.

Up to 256GB of soldered eMMC managed NAND Flash is available for local data storage.

The VPX3-ZU1B uses four advanced DC/DC power modules from Linear Technology using PMBus and PanaTeQ’s Smart Power Management technology.

For front-end I/O  interfaces, an on-board FMC site compliant to the Vita 57.1 HPC standard with 90 SE IO (45 Diff Pairs) and 10 MGT, allowing a wide range of applications such as Software Defined Radio, Video Camera Processing, advanced Multi-Axes Motors controller, Multi-Gig Ethernet Communications, LIDAR/RADAR/SONAR.

The board can act as a Single Board Computer in the VPX system thanks to its on-board PCIe Gen2 Switch. When the VPX3-ZU1B is System Controller, it can manage up to eight 3U OpenVPX slots with a PCIe x1 Gen2 link per slot. There is no need to add any SBC in the VPX System, improving Size, Weight, Power and Cost (SWaP-C).

A large number of the Zynq MSoC PS peripherals are available on the VPX backplane: 2x ETH 1000Base-T, 4x USB  2.0,  1x SATA 3.1, 1x CAN-2.0B, 2x RS-232/422/485, 4x MGT, 20x GPIO, Video Out Display Port 1.2.

The air cooled PanaTeQ System Development Kit VPX3-ZU1B-B1M-PSDK is available for the developers and includes a lab chassis with 5-slots Full-Mesh backplane, the VPX3-ZU1B-B1M-AS and RTM-ZU1 boards, a PentaLinux BSP, Reference designs and cables.