VPX3-VERSA-RF-A

• 3U VITA 46.0, 46.4, 46.6, 65.0 Compliant
• SOSA Aligned version VPX3-VERSA-RF-AS
• AMD VERSAL RF Series based
• VR1602/VR1652 VSVG1596 Package
• Dual Core Arm A72 up to 1.7 GHz
• Dual Core Arm R5F up to 750 MHz
• AI Engine Tiles 126
• DSP Engines 2256
• 4 or 8GB DDR4-3200 64-bit PS memory with 8-bit ECC
• 2GB LPDDR4-2133 32-bit PL memory
• 512MB (2x 2Gb) QSPI NOR
• eMMC 256GB
• MRAM 512KB
• 8x MGTY on VPX-P1, PCIe Up to Gen4 support
• 2x ETH 1000Base-X/SGMII on VPX-P1 Control Plane
• 16x GPIOs on VPX-P2
• 1x ETH 1000Base-T on VPX-P2
• 4x RS232 or 2x Full-Duplex RS422 on VPX-P2
• 1x USB 2.0 on VPX-P1
• Optional 4x Full-Duplex Optical Links VITA 66.4
• Optional Front-End connector or Backplane VITA 67.3 10x nanoRF
• Smart Power Management using DC/DC with PMBus
• Board Management Controller ARM Cortex-M3 based
• VPX System and IPMI controllers
• Air Cooled and Conduction Cooled
• KVPX Connectors in option

PanaTeQ’s VPX3-VERSA-RF-A is a 3U VPX module based on the VERSAL RF Adaptative Compute Acceleration Platform (ACAP) device from AMD. It support the RF series VR1602 or VR1652 devices.

The VERSAL RF integrate a Dual-core ARM Cortex-A72 based Application Processing Unit (APU), a Dual-core ARM Cortex-R5F based Real-Time Processing Unit (RPU), AI Engines, DSP Engines and a large Programmable Logic (PL) in a single device.  It also includes on-chip memory, external memory interfaces, and a rich set of peripheral connectivity interfaces.

The VERSAL RF integrate up to eight 14-bit (with calibration), 32 GSPS RF-ADCs with hard DUC and DDC IP enable fast, high resolution, flexible wide-spectrum characterization.

Eight 14-bit (with calibration), 16 GSPS RF-DACs provide RF transmit functions.

18 GHz I/O instantaneous bandwidth enables a wider input frequency pipe.

The board can be ordered with different versions of the VERSAL RF family of devices, coupled up to 4 or 8GB 64-bit DDR4-3200   Processing Memory with 8-bit ECC.

2GB 32-bit of LPDDR4-2133 is also available as the Programmable Logic Memory, allowing data signal processing.

256GB of soldered eMMC managed NAND Flash is available for local data storage.

The VPX3-VERSA-RF-A uses advanced DC/DC power modules from Linear Technology using PMBus and PanaTeQ’s Smart Power Management technology.

The board can act as a Single Board Computer in the VPX system. When the VPX3-VERSA-RF-A is System Controller, there is no need to add any SBC in the VPX System, improving Size, Weight, Power and Cost (SWaP-C).

A large number of the peripherals are available on the VPX backplane: 1x ETH 1000Base-T, 1x USB 2.0, 4x RS-232 or 2x Full-Duplex RS-422, 16x GPIOs, 2x CAN-FD.

The air cooled PanaTeQ System Development Kit VPX3-VERSA-RF-A-PSDK is offered for the developers.